Convert a Portrait to a China Visa Photo File for Free

To convert a photo to China visa size for free, start with the portrait in CEV’s free photo tool. Choose the picture from your device, let the tool prepare it, and review the output before downloading. The online-application version is a 354 × 472 pixel JPEG; a separate version is laid out for a 33 × 48 mm print.

Keep file dimensions and file size as separate checks. The tool targets 40–120 KB for the online JPEG, but you should still inspect the saved file’s properties. This walkthrough covers preparing that file, from choosing the original to saving the intended result. For the full portrait specifications, use the China visa photo requirements overview.

Choose the source before thinking about the output

Open the tool and select Choose from my photos. Its prompt asks for a picture taken within the last six months. Pick the portrait you intend to prepare, then look at the person in it before starting: keep the top of the head, face, and both shoulders visible, following the page’s framing advice.

Use the tool’s other preparation tips when choosing your source. It recommends facing the light, keeping the ears and eyebrows clear, and using a neutral expression with the mouth closed. Treat those prompts as part of selecting the original rather than leaving the entire decision to the conversion step.

If you want a new original, choose Take a photo instead. The page recommends an eye-level phone, a helper, and about four feet of distance. You can choose either starting point according to what you have ready; both lead into the tool’s photo-preparation process.

What the conversion does

The tool first checks the portrait. A picture may lead to a request for another shot before editing begins. Read the message if that happens and use it to prepare a different source. Keep the page open while the tool is working rather than treating the selected file as the finished result.

When editing proceeds, the tool removes the source background and composes the portrait on white. It straightens and positions the image, then prepares separate digital and print outputs. The single-print image also supplies the portrait used in the 4 × 6 inch sheet layout.

This workflow changes the background and image geometry without retouching the face. Review the resulting portrait with that purpose in mind. Focus on whether you selected the right original, how the person appears in the finished frame, and any messages shown with the result.

Read the three measurements correctly

354 × 472 pixels describes the width and height of the online-application image. Use the For the online application download when that is the file you want. The tool provides it as a JPEG, with a filename that includes “354x472” to distinguish it from the print versions.

40–120 KB is the target file-size range for that online JPEG. The tool adjusts JPEG encoding toward that range, but the saved file still deserves a check. Open its file information and compare the size with the target instead of assuming that the pixel dimensions also tell you how many kilobytes it uses.

33 × 48 mm describes the intended physical dimensions of the separate single-print output. Choose For printing for that version. Keep it identified as the print file, and do not use its millimeter label as the way to check the online image’s pixel dimensions.

Use those measurements for their separate purposes: pixels for the online image dimensions, kilobytes for its file size, and millimeters for the single print. For the rest of the photo requirements, follow the linked overview. There is no need to build a second full specification checklist inside your conversion workflow.

Review the picture and save the right file

The result page shows the prepared portrait and may display warnings alongside its downloads. Read those messages before saving a file. The tool asks you to check that your ears and eyebrows remain visible and that your face is evenly lit. Include that visual inspection even when your immediate goal is a particular file size.

Then choose the output by its label. If your task is to prepare a digital application photo, select that download and open the saved image once. Check the picture, its dimensions, and its file size together. Keep the original portrait separately so you can clearly distinguish the source from the prepared output.

For more than one applicant, finish this check for each person before moving to the next. Give your saved copies clear names or separate folders, and check the person in the image when opening it. Use the filename’s output label as an extra cue when choosing among the tool’s downloads.

For a print task, select the print version you actually intend to use. The tool also offers six copies arranged on 4 × 6 inch photo paper. The three download choices serve different uses; they do not mean you must submit three photographs. Keep the selected output tied to your next task.

Continue with the rest of the application

Once you have checked and saved the picture, return to your broader preparation list. Our step-by-step application article covers that sequence, while the tourist visa requirements guide covers the L-visa document checklist.

If you want a second set of eyes on application information, optional paid human form review checks a submitted application for omissions, formatting problems, and inconsistencies. Use the free converter for the photo file and choose form review separately for that application work.

Photo conversion FAQ

Can I use a portrait already on my phone?

Yes. Select Choose from my photos. The page asks for a picture taken within six months and provides preparation tips to help you choose the source.

Is 40–120 KB the same as 354 × 472 pixels?

No. One is the online JPEG’s file-size target; the other is its image width and height. Check both in the downloaded file’s properties.

Which file is intended for a single print?

Choose For printing, labeled 33 × 48 mm. The online-application JPEG and the 4 × 6 sheet are separate download choices.